niteo POJM220033, Instruction Manual

Page: 26 / 36

26
m) Do not operate the power tool near flammable materials. Sparks could ignite these materials.
n) Do not use accessories that require liquid coolants. Using water or other liquid coolants may
result in electrocution or shock.
ADDITIONAL SAFETY INSTRUCTIONS FOR SANDING OPERATIONS
7 . Safety warnings specific for sanding operations
a) Use proper sized sanding disc paper. Follow manufacturers recommendations,
when selecting sanding paper.
Larger sanding paper extending too far beyond the sanding
pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback.
The electronic version of the user’s manual is available at http://www.instrukcje.vershold.com
The symbol indicates that the package contains operating
instructions which should be read before use .
Wear ear protectors and protective goggles . Noise causes
progressive hearing impairment. During operation, flying sparks,
filings, splinters or splintering may occur and cause loss of vision.
Wear a protective mask.
Wear protective gloves .
Caution! Electric shock hazard. Always unplug the device before
working on it.
Generic warning sign designed to call attention to general
risks.It is combined with other warnings/instructions, which,
if neglected, can result in injury or damage to the device.
Protection class II: Protection against electric shock is ensured
by adequate insulation (double or enhanced), the failure of which
is very unlikely.
Indoor use only .
Disposal of electrical and electronic equipment — see
the DISPOSAL section of this manual.
4 EXPLANATION OF SYMBOLS