Nite Devil CAM950, User Manual

Page: 7 / 10

www.nitedevil.com
Doc XCAM950
NiteDevil Hi-Res Covert Camera Modules
Email:Last Revised: 11/08/2010
FREEZE OFF / ON
This option if set to ON will freeze current picture. Select OFF to revert to normal video
MIRROR MIRROR / ROTATE / V-FLIP / OFF
This option allows the normal video displayed to be switched to vertical flip, horizontal flip, both or none.
MIRROR This flips the camera view vertically on the screen.
ROTATE This flips the camera view horizontally on the screen.
V-FLIP This flips the camera horizontally and vertically on the screen.
D-ZOOM OFF / ON This option switches on digital zoom
GAMMA
The standard value is O.45 The values 0.05 ~ 1.00 can be set.
NEG IMAGE OFF / ON A colour negative image can be set.
RETURN
Returns to the SPECIAL menu.
D-ZOOM
DZOOM x1 ~ x32
PAN _______ 0
TILT _______ 0
RETURN RET
SPECIAL
1. CAM TITLE OFF / ON
2. D-EFFECT
3. RS485
4. MOTION OFF
5. PRIVACY OFF
6. SYNC INT
7. LANGUAGE ENGLISH
8. RETURN
RS485 This option is not available on this camera.
MOTION This option allows motion detection to be set
and although it does not output an alarm on this camera
it can be used to display MOTION DETECTION on the
monitor.
MOTION
AREA SELECT AREA 1 ~ 4
AREA DISPLAY ON / OFF
LEFT / RIGHT __________ 51
WIDTH __________ 42
TOP / BOTTOM __________ 38
HEIGHT __________ 30
SENSITIVITY __________ 34
MOTION VIEW OFF / ON
RETURN END
MOTION
Motion can be detected in 1 – 4 areas. You can
select 1-4 areas in SENSITIVITY setting. To
see the MOTION DETECTION message
displayed on the monitor, MOTION VIEW
must be set.
AREA SELECT 1 ~ 4 Select the area required.
AREA DISPLAY ON / OFF Determines whether to use the motion area selected in SENSITIVITY.
LEFT/RIGHT Determines the vertical axis for area.
WIDTH Adjusts the selected vertical area.
TOP/BOTTOM Determines the horizontal axis for area.
HEIGHT Adjusts the selected horizontal area.
SENSITIVITY You can select up to 4 areas. The higher the sensitivity the smaller the change to initiate
motion detection.
MOTION VIEW If you set this option to ON you can select an area colour and display MOTION
DETECTION on the monitor.
RETURN Return to SPECIAL menu.