www.nitedevil.com
Doc XCAM950
NiteDevil Hi-Res Covert Camera Modules
Email:Last Revised: 11/08/2010
CAM TITLE
Allow the display of a 15 character camera title displayed on the monitor.
D-EFFECT
This option covers the display effects that can be selected.
MENU SETTINGS
1. LENS
MANUAL
2. EXPOSURE
3. WHITE BAL
AWB
4. DAY NIGHT
AUTO
5. 3DNR
ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
SPECIAL
1. CAM TITLE
OFF / ON
2. D-EFFECT
3. RS485
4. MOTION
OFF
5. PRIVACY
OFF
6. SYNC
INT
7. LANGUAGE
ENGLISH
8. RETURN
CAM TITLE
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z
>
►◄▲▼ ( )
_
_
_ / = & “ ~ , ..
CLR POS END
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __
CAM TITLE
If you wish to display the camera title you must
switch camera title to ON.
Note that if the CAM TITLE is OFF no title is
displayed on the monitor even if one is entered.
Move up and down buttons to select CAM TITLE
and switch it ON. Then press the SET button and
move to the required character using the direction
buttons and press the SET button to select. Repeat
to select up to 15 characters. If you move to CLR
and press the SET button all characters are cleared.
To edit a character select the character bottom left
arrow and press SET button, move the cursor over
the character to be edited, then select the character
required and press the SET button. Then select POS
to position cam title, press SET, move to the
position required and select END. Press SET again
to return to SPECIAL menu.
SPECIAL
1. CAM TITLE
OFF / ON
2. D-EFFECT
3. RS485
4. MOTION
OFF
5. PRIVACY
OFF
6. SYNC
INT
7. LANGUAGE
ENGLISH
8. RETURN
D-EFFECT
FREEZE
OFF / ON
MIRROR
MIRROR / V-FLIP / ROTATE
OFF
D-ZOOM
OFF / ON
GAMMA
0.45
NEG IMAGE
OFF / ON
RETURN
RET
