www.nitedevil.com
Doc XCAM950
NiteDevil Hi-Res Covert Camera Modules
Email:Last Revised: 11/08/2010
SHUTTER AUTO, 1/50, FLK, 1/250, 1/500, 1/2000, 1/5000, 1/10000, 1/100000, x256, x128, x64, x32, x16, x8, x4, x2
Select EXPOSURE by using UP & DOWN buttons and then select desired mode.
AUTO
Select this mode to control the shutter speed automatically.
FLK
Select this mode if flickering occurs on screen.
BRIGHTNESS (1 – 100)
You can control the brightness by using the LEFT & RIGHT buttons in Manual lens mode.
AGC OFF / LOW / MIDDLE / HIGH
Set AGC from low to high gain. Note that the higher the gain level, the brighter the screen but the higher noise level.
Note that if AGC shows - - - then RESET the camera.
SENSE-UP OFF / AUTO
x2 / x4 / x8 / x16 / x32 / x64 / x128 / x256
When it is dark the camera automatically detects the light level and tries to compensate by maintaining a clear picture.
OFF
The option is deactivated when the OFF option is selected or when AGC is OFF or DAY&NIGHT is OFF.
AUTO
You can adjust brightness by increasing/decreasing the shutter speed (x2 ~ x256)
Note that noise can be amplified as SENSE-UP in increased.
BLC OFF / BLC
/
HSBLC
Backlight compensation allows you to get a clear picture even when objects are in a strong backlight.
BLC
Selecting BLC and pressing SET button enters the BLC menu.
Menu Settings
1
. LENS
MANUAL
2. EXPOSURE
3. WHITE BAL
AWB
4. DAY NIGHT
AUTO
5. 3DNR
ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
LENS
When the SETUP menu screen is displayed, select LENS
by using the UP & DOWN buttons so that the arrow
selects LENS.
Select the connected type by using the LEFT & RIGHT
buttons.
Selecting MANUAL selects manual lens
Selecting DC selects Auto Iris Lens. When DC is selected
you can select the brightness control by pressing the SET
button. Set range between 0 ~ 100.
MENU SETTINGS
1. LENS
MANUAL
2. EXPOSURE
3. WHITE BAL
AWB
4. DAY NIGHT
AUTO
5. 3DNR
ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
EXPOSURE
SHUTTER
1/250
BRIGHTNESS
- - -
AGC
MIDDLE
SENSE-UP
OFF
BLC
OFF
D-WDR
INDOOR
RETURN
RET