Chapter 5. Keyboard Port Operation
37
Port OS Control
A port’s operating system can be changed to match that of the computer
attached to the port. To change a port’s operating system, key in the following
hotkey combination:
1. Invoke hotkey mode with the
[Num Lock]
+
[-]
or
[Ctrl]
+
[F12]
combination.
2. Key in
[Function]
, where [Function] refers to one of the function keys in
the following table:
After pressing a function key you automatically exit
Hotkey
mode.
Restore Default Values
This administrator only hotkey restores the NS-KVMUV8 / NS-KVMUV16
default values. See
RESTORE DEFAULT VALUES
, page 26. To restore the
default values, key in the following hotkey combination:
1. Invoke hotkey mode with the
[Num Lock]
+
[-]
or
[Ctrl]
+
[F12]
combination.
2. Press
[R]
.
3. Press
[Enter]
.
After you press [Enter], the command line displays
RESET TO DEFAULT
SETTING
for three seconds; then the message disappears and you
automatically exit
Hotkey
mode.
Key
Description
F1
Sets the Port OS to Windows
F2
Sets the Port OS to Mac
F3
Sets the Port OS to Sun
