i60A is automatically turned off when repeating hi power full flash continuously over 20
to 30 times to protect the flash circuitry from overheating. It will automatically recover
after 15 minutes of inactivity. The pilot button will blink in the red color every 1.5
seconds.
i60A has an energy saving power off function
Protect overheating function
To save battery energy, i60A automatically switches to stand-by mode, in A mode,
TTL mode & Manual Power mode, in about 2 minutes of idle use; in SD mode, SF
mode & Wireless TTL Slave mode, in about 5 minutes of idle use.
While i60A is in the stand-by mode a Pilot button blinks every 2 seconds showing
the flash unit is in stand-by mode. To turn on i60A again, press the camera’s shutter
button halfway or press any button of the flash unit.
In case i60A is not in use for over 60 minutes, the unit is completely turned off.
To turn on i60A again, take the first step of turning the flash unit on.
Basic Operation
5
