You can select the power by rotating the Control
wheel from 1/256 – 1/1 (Full) power.
You can select the power by rotating the Control
wheel from 1/256 – 1/1 (Full) power.
Wireless Slave Flash
i60A has a wireless remote flash system as a slave unit. You can enjoy
creative flash photography with multiple lightings from the various directions.
3 slave modes are provided, Slave Digital (SD) for digital pre-flash system;
Slave Film (SF) for analogue flash system and Wireless TTL slave for
wireless remote. All channels and groups A/B/C may be used.
SD
: In this mode, i60A synchronizes to the
pre-flash system. The master flash is to be
set at TTL mode.
Press the lock button once to lock this condition
on your flash. (Press it again to release the lock)
Press the lock button once to lock this condition
on your flash. (Press it again to release the lock)
SF
: In this mode, i60A synchronizes to the
traditional single flash system. The master
flash is to be set at manual mode. Studio
lighting system synchronizes to this mode.
This mode is also available for open flash,
and for a standard flash in the market.
13
Wireless Remote - Optical Transmission :
In this
mode, i60A synchronizes to the wireless remote
flash system. For remote All channels and with
groups A=Group A/ B=Group B/ C=Group C
digital flash.
Rotate the Function dial to “A” “B” “C” mode then
AF-assist light blinking.
NOTE
Optical mode will activate automatically when no NAS signal,
or 6 seconds after disconnected from other NAS device.
