manualshive.com logo in svg

Nissin AIR 10S COMMANDER, Instruction Manual, Page: 21 / 28

Share
Download
Nissin AIR 10S COMMANDER Instruction Manual Download Page 21

20

Modeling light

Normal flashguns have a very short flash duration. In order to estimate and 
control the flash more efficiently, the modeling light on slave unit can be used. 
It is a constant light for the user to estimate and preview the light 
before shooting(flash emitting).

(*) Modeling light is a new feature of the NAS system. 
    Nissin Di700A, i60A, i40 flash and other discontinued 
    models do not support this feature.

CAUTIONS

TTL auto flash exposure mode of Nissin Air 10s (Canon version) only supports 
Canon camera. Other brand cameras or camera models without our compatibility 
test does not support.

CAUTIONS

If you do not press any group selection button, which means all group letter in the 
display do not blink

, pressing the modeling light button will invert the modeling on/off 

setting of all groups. For example, A & C: On and B & D: off, press the modeling 
light button without selecting any group, will cause to A & C: Off, and B & D: On.

1. Press the Group Selection button(s), the group letter(s) blink. 

2. Press            to switch the group’s modeling on/off.

3. Press the Group Selection button again when setup completed.

Turn on/off the modeling light

Summary of Contents for AIR 10S COMMANDER





























Reviews:

No comments