manualshive.com logo in svg

Nissin AIR 10S COMMANDER, Instruction Manual, Page: 2 / 28

Share
Download
Nissin AIR 10S COMMANDER Instruction Manual Download Page 2

Thank you for purchasing a Nissin product

Before using this commander unit, read this instruction manual 
and the camera instruction manuals and NAS Flash manual to 
familiarize yourself with the operations. 

The commander Nissin Air 10s (Canon) is an advanced commander for 
wireless flash shooting.It controls up to 8 groups of NAS (Nissin Air System) 
flash (type Canon) that have a wireless multiple flash shooting function using 
NAS (radio transmission). Please note that Nissin Air 10s (Canon) are not 
usable with other branded cameras for TTL operation.

Please refer to Nissin’s compatibility chart shown here: 
http://www.nissindigital.com/download.html

Compatible cameras

1

Changes or modifications not expressly approved by the 
party responsible for compliance could void the user's 
authority to operate the equipment. 

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference, and (2) this
device must accept any interference received, including 
interference that may cause undesired operation.

Summary of Contents for AIR 10S COMMANDER





























Reviews:

No comments