Nisca PR53FS, Operation Manual

Page: 33 / 57

5
- b) Setting the ink ribbon
?
When taking out the ink ribbo n cartridge before it becomes empty
(while LCD panel displays other than "Ribbon Empty"), press RIBBON CHANGE
key and confirm that the head is lifted.
?
Cartridge can not be removed with the head at the printing position.
The ribbon may be wrinkled or broken if the cartridge is removed forcibly.
Removing forcibly may cause damage on the printer.
?
Do not attempt to open the Top Cover and take out the Ribbon Cartridge
without lifting the Print Head by pressing RIBBON CHANGE key.
?
Normal print quality of the next printing will not be obtained.
?
Do not leave the ink ribbon cartridge off hand. When loading again, take up
the frame which has been exposed before inserting.
?
Dust on the ribbon or cartridge may cause a trouble on the print head.
Press Ribbon Change key about 1 sec.
Then make sure of the
" Removable Ribbon"
has appeared
on lower part of operation panel.
Cartridge Retaining Lever
Open the front cover of the printer.
Release the Cartridge Retaining Lever
and pull out the Ink Ribbon Cartridge.