Need Help?
877.716.8550
Starlight.org/gaming/support
27
4.4
Remove the Nintendo Switch Console
1.
Make sure the Gaming station’s main power cord is disconnected from power.
2.
Use the key provided with the unit to unlock
both locks on the underside of the main
cabinet.
3.
The entire top of the cabinet can be
removed from the unit. To remove, lift the
front of the cabinet up to slightly tilt the
cabinet cover and to get a solid two-hand
grip on the cabinet cover. Then lift the
cabinet cover straight up until the two tabs
on the back of the cover exit the bottom
cabinet.
4.
Use a 7/16” socket driver to remove the two
nuts that attach the console cover assembly
to the cabinet. Once the nuts are removed,
lift the console cover assembly way from the
cabinet and set aside for reinstallation later.
5.
Use a 7/16” socket driver to remove the two
nuts that attach the console bracket to the
cabinet.
6.
Lift the Nintendo Switch console out of the
dock.
7.
Set the console cover assembly back in
place; to save time you do not need to
secure it with the nuts. The cabinet cover
will be installed afterward, which will
prevent this from being removed.
8.
Set the console bracket and all 4 nuts inside the cabinet to store for later.
9.
Install the cabinet cover by inserting the back tabs of the cover into the slots in the back
side of the bottom cabinet, then lower into place.
10.
Use the key provided with the Gaming station to lock both locks on the underside of the
main cabinet.
