IS-TWL-DEBUGGER Setup
2008-2009 Nintendo
9
TWL-06-0024-001-E
CONFIDENTIAL
Released: March 17, 2009
3 Operation Environment
3.1 Requirements
The following components are required to operate IS-TWL-DEBUGGER.
Table 3-1 Operation Environment Requirements for IS-TWL-DEBUGGER
Component
Description
Computer
PC/AT-compatible
Operating system
One of the following 32-bit versions must be installed:
•
Microsoft Windows Vista, Service Pack 1 or later (32-bit version)
•
Microsoft Windows XP, Service Pack 2 or later (32-bit version)
Memory capacity
As recommended by the operating system or greater; depending on the scope
of the project that you are developing, more memory may be required.
Disc capacity
50 megabytes or more of free memory
Disc drive
Requires a drive that can read CD-ROMs for installation.
Display
XGA display with a 1024x768 resolution or higher
USB interface
One port (two ports when using the capture option)
USB 2.0 (high-speed) is recommended for high-speed downloads or video
capture
3.2 About USB 2.0
The IS-TWL-DEBUGGER device supports USB 2.0 high-speed (480 Mbps) data transmission. To take
advantage of all the IS-TWL-DEBUGGER features, make sure to observe the following cautions.
•
Confirm that the computer is compatible with high-speed data transmission. If the computer does not
support high-speed USB, use a high-speed-compatible USB interface card.
•
Make sure to use a USB cable that is compatible with high-speed data transmission to connect the
computer with the IS-TWL-DEBUGGER device. A high-speed-compatible USB cable is included with
IS-TWL-DEBUGGER.
•
When using a USB hub to connect the computer to the IS-TWL-DEBUGGER device, make sure that
it is a high-speed-compatible hub.
•
If the number of USB devices connected to the computer increases, the data transfer speed will go
down. To maximize the data transfer speed, make sure that the only USB device connected to the
computer is the IS-TWL-DEBUGGER device.
