11
ninjakitchen.com
ninjakitchen.com
10
11
ninjakitchen.com
USING YOUR TOTAL CRUSHING® PITCHER – CONT
6
Place the lid on the pitcher, aligning
the triangle symbol located on the lid
with the triangle symbol located on
the pitcher’s handle. Press down on the
handle until you hear a click. The triangle
symbols
MUST
be aligned for the lid to
lock into place and the unit to operate.
7
AUTO-iQ MODE
To begin, press the Power button.
The unit will automatically default to
AUTO-iQ mode (the Mode button in the
upper right corner of the display will
read AUTO-iQ). When AUTO-iQ mode
is selected, choose the pre-set program
that best suits your recipe. The pre-set
feature will automatically stop the unit
at the end of the program. To pause
the unit at any time, press the currently
active button a second time, or press the
Power button to cancel.
IMPORTANT:
Review all warnings on
pages 4–5 before proceeding.
4
Exercising care, grasp the Stacked
Blade Assembly by the top of the shaft
and place it onto the drive gear inside
the pitcher. Note that the Stacked Blade
Assembly will fit loosely onto the
drive gear.
5
Add ingredients, making sure to not
exceed the Max Fill line marked on the
side of the pitcher.
IMPORTANT:
Review all warnings on
pages 4–5 before proceeding.
TIP:
Easily toggle between
AUTO-iQ® and MANUAL modes by
pressing the Mode button in the upper
right corner of the touchscreen. Note
that it automatically defaults to
8
MANUAL MODE
To begin, press the Power button and
then press the Mode button in the
upper right corner of the display to
change from AUTO-iQ to MANUAL
mode. Choose the speed that best suits
your recipe. The PULSE setting will
run only when touched. The LOW and
HIGH settings will run continuously until
they are manually stopped. To pause
the program, press the active program
button a second time.
9
Wait for the unit to come to a complete
stop before removing the pitcher from
the motor base. To remove the pitcher,
turn it counterclockwise and lift it up.
10
For thinner mixtures, ensure the lid is
locked into place, open the pour spout
cap on the lid, and empty the contents
of the pitcher through the pour spout.
11
For thicker mixtures that cannot be
emptied through the pour spout, remove
the lid and Stacked Blade Assembly
before pouring. To remove the lid, press
the RELEASE button on the lid and lift
the handle. The lid can then be removed
from the pitcher. To remove the Stacked
Blade Assembly, carefully grasp it by the
top of the shaft and remove from the
pitcher. The pitcher can then be emptied.
12
Unplug the unit when finished and
release the motor base from the work
surface. Refer to page 15 for storing
instructions.
