9
ninjakitchen.com
ninjakitchen.com
1
Remove all packaging materials from the
unit. Exercise care when unpacking the
Stacked Blade Assembly as it is sharp.
2
The Stacked Blade Assembly is
NOT
locked in place in the pitcher. Handle the
Stacked Blade Assembly by grasping the
top of the shaft.
3
Wash the pitcher, lid, and Stacked Blade
Assembly in warm, soapy water using
a dishwashing utensil with a handle to
avoid direct contact with the blades.
Exercise care when handling the Stacked
Blade Assembly, as the blades are sharp.
4
Thoroughly rinse and air-dry all parts.
5
All attachments are dishwasher safe.
It is recommended that the lid and
Stacked Blade Assembly be placed on
the top rack of the dishwasher. Ensure
the Stacked Blade Assembly is removed
from the pitcher before placing in the
dishwasher. Exercise care when handling
the Stacked Blade Assembly.
6
Wipe touchscreen with a soft cloth.
Allow it to dry completely before using.
8
9
ninjakitchen.com
USING THE NINJA® PRO TOUCH™ BLENDER
IMPORTANT:
Review all warnings on
pages 4–5 before proceeding.
USING YOUR TOTAL CRUSHING® PITCHER
IMPORTANT:
Review all warnings on
pages 4–5 before proceeding.
TIP:
If the Stacked Blade Assembly is
not fully seated, you will not be able to
install and lock the lid into position.
TIP:
To learn more about the unit’s
programs, refer to page 9.
NOTE:
DO NOT
add ingredients before
completing installation of the Stacked
Blade Assembly.
NOTE:
The pitcher can be installed in
two different orientations. The handle
can be positioned on the front-right
corner of the motor base or the front-
left corner of the motor base.
2
Lower the pitcher onto the motor base.
The handle should be aligned slightly
to the right and the pitcher should be
oriented so the LOCK symbols on the
motor base are visible.
1
Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.
3
Rotate the container to the 5 left until
you hear a click.
