background image

www.ninjakitchen.com

8

9

TOLL FREE:

 

1-800-798-7398

Using the Ninja

 

Professional Blender

Shaft

 

BEFORE FIRST USE

1

  Remove all packaging material and 

labels from the appliance.

2

  Wash the lid, pitcher and blade 

assembly in warm, soapy water with a 
soft cloth.  Use caution when washing 
the blade assembly as the blades are 
very sharp. 

3

  Rinse and dry thoroughly.

4

  The pitcher, lid and blade assembly are 

all dishwasher safe.  It is recommended 
that the lid and blade assembly go on 
the top rack.  Ensure that the blade 
assembly is removed from the pitcher 
before placing in the dishwasher. 

5

  The motor base can be wiped clean 

with a damp cloth.

 

HOW TO ASSEMBLE

 

CAUTION:

 Make sure that the motor 

base is unplugged from the power 
source.

1

  Place the motor base on a clean, dry, 

level surface.  

2

  Lower the pitcher onto the motor base.  

(

Fig. 1

3

  Rotate the pitcher to the left as far 

as it will go.  As the pitcher rotates, it 
will lower and the safety tabs on the 
bottom of the pitcher will slide under 
the safety tabs on the top of the motor 
base.  The pitcher can be placed on the 
motor base two ways; the handle can 
be on the front right corner or the front 
left corner.  (

Fig. 2

)

4

  Holding the blade assembly by the 

shaft, place it onto the gear shaft inside 
the pitcher.  (

Fig. 3

)

 

 Ensure that the 

blade assembly fits snuggly around the 
gear shaft and that the blade shaft is 
standing straight. 

  CAUTION: 

Blades are sharp! Use 

extreme caution when handling the 
blades.  Always hold them by the shaft.

 

HOW TO USE

 

 IMPORTANT: 

DO NOT 

attempt to 

operate the appliance without the lid 
on.  

1

  Place pitcher on motor base and insert 

the blade assembly.

2

  Add the ingredients to the pitcher.  

Make sure your total of ingredients 
don't go higher than the highest 
measured marking line on the side of 
the pitcher. 

 

IMPORTANT:

 Never add ingredients 

into the pitcher before placing the 
blades in first.  

3

  Place the lid onto the pitcher with the 

locking handle in the upright position 
and the pouring spout on the corner 
opposite the pitcher handle.  Align 
the arrows ( ) located on the lid and 
pitcher handle.  Press the lid down into 
the pitcher.  Press the locking handle 
down so that the latches on the lid fit 
under the tabs on the pitcher.  (

Fig. 4

)

 

NOTE: 

If you need to add additional 

ingredients while the blender is 
processing, open the pouring spout 
cap and pour the ingredients in 
through the opening.  

4

  Plug the power cord into the electrical 

outlet and press on the power button.

 

NOTE: 

As a safety feature, the power 

button will blink quickly and the motor 
will not work if the pitcher and lid are 
not secured in place  When the pitcher 
and lid are installed properly, the power 
button will blink slowly, indicating that 
the blender is ready for use.  

5

  Select the speed according to your 

blending requirements:

 

  Use the speed 1 button for  

 

 

processing and mixing.

 

  Use the speed 2 button for blending  

 

and ice crushing.

 

  Use the speed 3 button for pureeing  

 

and liquifying.

 

  Use the pulse button for controlled  

 

chopping and processing.

 

*

 See Blending Chart.

Locking 
Handle

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Summary of Contents for NJ600 30












Reviews: