9
CUSTOMER CARE - NZ: 0800 002 999
7-646-5288
Using the Master Prep
®
Bowl
CAUTION:
Blades are sharp! Use extreme caution when
handling the blades. Always hold them by the shaft.
IMPORTANT:
Never run the appliance empty.
1
Place the Master Prep
®
bowl on a clean, dry, level
surface.
2
Holding the lower blade by the shaft, place it over the
spindle pin inside the Master Prep
®
bowl.
(Fig. 5)
3
Carefully insert the upper blade over the lower blade
rotating it until it locks onto the lower blade.
(Fig. 6)
IMPORTANT:
Always assemble the blades inside the
container.
WARNING: DO NOT
try to place the blades onto the
power head and then into the Master Prep
®
bowl.
4
Place the food that you want to process into the Master
Prep
®
bowl.
IMPORTANT:
Never add ingredients into the Master
Prep
®
bowl before placing the blade assembly in first.
NOTE: DO NOT
add more than 450 ml dry or 230 ml
liquid ingredients as this will strain the motor and may
cause overflow.
Fig. 5
Fig. 6
Shaft
