BREWING
CUSTOM BREWS
CLASSIC BREW & RICH BREW
1
After filling the water reservoir, place
either the COFFEE or TEA filter holder
into the brew basket. Add the ground
coffee, loose leaf tea, or tea bags to
the filter.
2
Close the brew basket, ensuring it is
securely in place. The control panel will
display either COFFEE or TEA settings
based on the filter holder that has been
inserted.
3
Use the Multi-Serve dial to select the brew
size. Place the empty vessel you would like
to brew into under the brew basket.
4
Turn the START/SELECT dial to choose
either Classic Brew or Rich Brew
5
If brewing tea, press the Tea button to
toggle to the tea menu, and use the dial to
choose your tea type. To change your brew
style while in the tea menu, press the Tea
button again.
6
Press the START/SELECT dial to start the
brew. A progress bar on the control panel
will show the status of the brewing cycle.
To cancel the brew at any time, press the
dial again or press the Power button.
7
The unit will beep and the clock will
display “End” when the brew is complete.
NOTE:
Some brews have a pre-infusion
cycle with varying times. The brewing
cycle will begin, then there will be a
pause for a short period before resuming.
This process is used to evenly saturate
the coffee grounds or tea leaves.
NOTE:
If making a single cup, lower the
Single-Serve Cup Platform and set your
vessel in the center of it. Please ensure
you are using at least a 12 oz. cup for
the Cup size, 14 oz. cup for the XL Cup
size, 16 oz. travel mug for the Travel Mug
size, and 20 oz. travel mug for the XL
Multi-Serve size.
NOTE:
Rich Brew will use slightly less
water and yield slightly less brewed
coffee or tea than Classic Brew.
NOTE:
If the brew basket is closed
with no filter holder in place, both
COFFEE and TEA will flash and the
unit will not brew.
4
Turn the START/SELECT dial to choose
either Over Ice Brew or Cold Brew
5
If brewing tea, press the Tea button to
toggle to the tea menu, and use the dial
to choose your tea type. To change your
brew style while in the tea menu, press
the Tea button .
6
Press the START/SELECT dial to start the
brew. A progress bar on the control panel
will show the status of the brewing cycle.
To cancel the brew at any time, press the
dial again or press the Power button.
7
The unit will beep and the clock will
display “End” when the brew is complete.
OVER ICE BREW & COLD BREW
1
After filling the water reservoir, insert either
the COFFEE or TEA filter holder into the
brew basket. Add the ground coffee, loose
leaf tea, or tea bags to the filter.
2
Close the brew basket, ensuring it is
securely in place. The control panel
will display either COFFEE settings
based on the filter holder that has been
inserted.
3
Fill your desired vessel to the top with
ice cubes and place the vessel below the
brew basket. Use the Multi-Serve dial to
select the brew size.
PREPARING & USING
THE NINJA
HOT & COLD BREW SYSTEM™ – CONT.
NOTE:
For COLD BREW coffee
ONLY
,
add an additional scoop of coffee
grounds to the brew basket.
NOTE:
Cold Brew takes about 15 minutes
for a Full Carafe.
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
NOTE:
DO NOT
add ice to the
water reservoir.
NOTE:
Glassware other than the provided
Ninja glass carafe may be used with the
Cold Brew setting but not the Over Ice
Brew setting.
15
ninjakitchen.com
14
1-877-646-5288
NOTE:
If “CnCL” displays on the control
panel, the brew has been canceled.
Press the START/SELECT dial to begin
the brew again.
