manualshive.com logo in svg

Ninja BL700 series, Owner'S Manual, Page: 14 / 23

Share
Download
Ninja BL700 series Owner'S Manual Download Page 14

14

TOLL FREE:

 

1-800-798-7398

 

HOW TO STORE

1

  Store the Ninja

™

 Kitchen System 1100 

upright with the pitcher on the motor 
base, 6-Blade assembly inside the pitcher 
and lid on the pitcher. Do not place 
anything on top. Store the bowl with the 
4-Blade assembly inside and the lid on 
top. Keep the bowl and the rest of the 
attachments along side the appliance  
where it will not be damaged and won’t 
cause hazard. 

 

RESETTING THE MOTOR THERMOSTAT

The Ninja

™

 KS1100 features a unique safety 

system which prevents damage to the 
unit’s motor and drive system should you 
inadvertently overload your appliance. If the 
appliance is being overloaded, the motor 
will stop and the power light will remain 
lit and the 1, 2 and 3 will flash. To reset the 
appliance, follow the resetting procedure 
below:

1

  Unplug the appliance from the electrical 

outlet.

2

  Remove and empty the container and 

ensure that no food is jamming the 
cutting blades or attachments.

3

  Allow the appliance to cool for 

approximately 15 minutes.

4

  Re-install the container onto the base 

and re-plug the appliance into the 
electrical outlet.

5

  Proceed to use the appliance as 

before making sure not to exceed the 
recommended maximum capacities..

 

HOW TO CLEAN

 

CAUTION:

 Make sure that the motor 

base is unplugged from the power 
source before inserting or removing any 
attachment and before cleaning.

 

CAUTION:

 

DO NOT

 immerse the motor 

base into water or any other liquid. 

1

  Separate/remove all parts from each 

other.

2

  Clean the motor base with a damp cloth 

and wipe dry. 

3

  Place the pitcher and bowl in the 

dishwasher. Place the lids and 
attachments on the top rack. 

Use caution 

when handling the blade assemblies as 
the blades are very sharp. 

 

NOTE: 

You may also wash the containers 

by filling 

¾

 of the container with warm 

water and a drop of dish washing 
detergent, placing the corresponding lid 
on the container and pressing the pulse 
button a few times. Once clean, remove 
the container from the motor base. Rinse 
the container, attachment and lid under 
running water. Allow all the parts to dry 
before storing.

 

Please call customer service if any 
servicing needs to be performed on the 
appliance at 1-800-798-7398.

Care & Maintenance

BL700_30_BL701_30_SERIES_IB_ENG_110106.indd   14

11-01-07   10:26 AM

Summary of Contents for BL700 series
























Reviews:

No comments