background image

4

Safety information

While

 

sewing

please

 

follow

 

the

 

basic

 

safety

 

precausion

 

as

 

below

,  

Danger–in order to reduce the risk of electric shock

1. When you leave the sewing machine unattended, unplug it to prevent accidents.
    Unplug the sewing machine before any cleaning or finishing your work.

2. Switch off the machine before power parts maintenance work.

Warning

-

in

 

order

 

to

 

reduce

 

the

 

risk

 

of

 

burns, fires, electric 

                 shocks or personal injuries 

`4.In the absence of guardianship, never let children or disabled people use sewing 

machine 

12. When sewing, do not hold the fabric tight or pull the fabric. The needles could

15. Keep sewing machine out of reach of children.

10. Do not use damaged needle plate, or it will cause needle break.

bend or break.

11. Do not use bent needles.

13. Switch off and unplug the sewing machine before threading the needle, 

changing the needle, setting the presser foot.

5. Do not use the sewing machine outdoors.

6. Do not use the sewing machine in spray or oxygen storage area.

1. Do not play sewing machine as a toy. Children should be kept away from the 

appliance and the mains cable.

2. Please use this sewing machine follow the instruction manual, do not use any

accessories other than those supplied.

4. Do not drop anything into the gap of the sewing machine, also do not plunge 

anything into the gap of the sewing machine.

3. If the machine or mains cable is damaged, or machine does not run, or fallen into 

the water, do not use the machine any more, please contact the service center or 

another suitably qualified specialist workshop to check and repair.

9. Be careful when using the moving parts of the machine, especiall the needle.

7. When you want to disconnect the power supply of the sewing machine, please 

turn the main power switch to “O” (O means off), and then unplug the machine.

8. When you unplug the machine, always take hold of the plug itself, not the cable.

Summary of Contents for Stitch4you

























Reviews: