WindRunner™ self-balancing electric vehicle user’s manual
65
Power assistant mode.
Under power assistant mode, if the driver is not holding firmly to the handle, the
WindRunner itself shall advance a section of distance, and then trigger the intelligent safety alarm. After alarmed,
if its speed is not reduced, it shall enter the standby mode after a few seconds. It is forbidden to let the
WindRunner itself move under power assistant mode. Ensure that the operating bar of the WindRunner is under
your control.
It is strictly forbidden to release the handle under power assistant mode
Internal faults.
When the WindRunner detects an internal fault (for example, one battery power failure,
and one set of balancing unit failed), it shall immediately trigger the intelligent safety alarm. If just ride the
WindRunner, immediately get off, and do not hesitate to contact the authorized after-sale service agent to repair.
If the intelligent safety alarm is activated once powered on, it may be caused by insufficient battery voltage.
Please charge it. Once charged, if it still gives an alarm, please consult the chapter IX to solve the troubles, or
contact the factory for repair.
