WindRunner™ self-balancing electric vehicle user manual
34
After the WindRunner starts, the system will be in standby mode. At this moment, press the “Speed limit”
button of intelligent remote key. The LED at the lowest part of display panel shall be red and glow steadily,
accompanied by a buzz. At this moment if the driver gets on, the maximum speed of WindRunner shall be not
more than 5km/h (gentler operating than that in normal mode so its response should be more sluggish). This
mode is suitable for the new or unskillful riders. After its speed is beyond 5m/h, the WindRunner shall be faced
upward, pushing the driver backward to forcibly decelerate.
Display panel under Speed limit mode (Rear LED shows red)
Both beginner mode and Speed limit mode shall be saved, even if
powered off. After next startup, it may automatically enter the
working mode before the last power off.
Under beginner mode, press the “Speed limit” button of intelligent remote key to change into Speed limit
mode (the last LED on display panel shall be blue and glowing steadily. You will also hear an accompanying
