WindRunner™ self-balancing electric vehicle user manual
24
2.5 Test riding
Now you have installed the WindRunner properly, and primarily understand the intelligent remote keys.
Please take the following steps before test riding:
1) Stand beside or behind the WindRunner. Keep the foot mat at a basic level position. Hold the handle with
one hand, and press the
“ON/OFF” of intelligent remote key for 1s with the other hand and the WindRunner
shall start. 5 LEDs on the central display panel shall come on in sequence, meanwhile, accompanied with vibration
and buzz similar to that of starting the engine of a car. After the buzz disappears, the WindRunner self-test will be
complete. Keep the foot mat basically leveled then tap any one foot mat lightly with your foot. You may hear a very
short buzz, and then the wheels of WindRunner begin to move, and enter into the power assistant mode.
At the moment of startup, keep the WindRunner upright, and the
foot mat basically leveled with the operating bar at middle
position. Otherwise the intelligent self-test logic may determine
that the WindRunner is unsuitable for starting and unable to
start. Refer to 5.4 for details.
2) Under power assistant mode, you may slowly push the operating bar forward or backward, the WindRunner
shall accompany a forward or backward movement. Turn the operating bar right or left lightly, the WindRunner
shall also turn along the direction of your turning of operating bar.
