"Primary" and "expanded" control function setting
The transmitter offers the facility to adjust the sensitivity of the
stick movements. Initially we recommend "softer" reduced travels
for beginners.
Open the transmitter battery compartment and insert the four AA
cells* (check for correct polarity).
Procedure:
Switch the transmitter on, and press
the right-hand stick inward.
Reduced control function
The "Dual-Rate status indicator" disc
on the screen is reduced to half.
Manoeuvrability 50%
Expanded control function:
Press the right-hand stick inward
again.
The full black disc now appears on the
screen.
Manoeuvrability 100%
* Please read the information regarding dry cells on page 5.
Charging the flight battery
Connect the battery charger to
the mains PSU, and plug the
PSU into a mains socket. The
red monitor LED on the charger
lights up.
Connect the battery to the char-
ger, and use "+" or "-" to set the
charge current (high = fast, low = longer battery life). Press the
Start button. The monitor LED flashes. When the charge process
is finished, all the LEDs on the charger flash, and you will hear
an audible beep. Disconnect the battery from the charger, then
disconnect the mains PSU from the wall socket.
Safety Notes
The battery must not be left unsupervised during the
charge process or be placed on an inflammable surface.
Protect from damp. Do not subject it to direct sunshine,
and do not cover the charger.
Do not charge batteries that are hot to the touch. Allow
batteries to cool down to ambient temperature. Charge
the battery only using the charger included in the set; do
not use any other charger. The charger should only be
used to charge the battery included in the set. Not suitable
for charging the transmitter battery!
It is essential to read right through the safety notes
relating to LiPo batteries on page 11.
10
Operating Instructions - GALAXY VISITOR 3 RTF FTR 2.4 GHz No. NE2529M2
No. NE2529M1
