29
KNBL/01/04.09.2019
8)
As your usage choice install the mask or mouthpiece in to medication cup.
9)
Be sure the air-filter is mounted on
device and power key is “0” mode.
10)
Plug the device in to socket which has suitable voltage and frequency.
11)
Operate the device by pushing On/Off button of it and turn it “1” mode.
12)
Be sure aerosol is coming from medication cup.
13)
Depending on your choice of use, move the nebulization control valve located
in the lid of the medication
container in the “+” or “
-
”
direction and adjust the
aerosol output amount as desired.
As the amount of steam exiting in the “+”
direction increases, the time to finish the medication will be shortened and the
particle sizes of the generated aerosol will increase.
In the “
-
”
direction, the
amount of aerosol output will be reduced and the time to finish the
medication will be extended and the particle sizes of the generated steam will
be reduced. It is recommended to use the nebulization control valve
in the “+”
