PN 30192 rev 8
© NimbeLink Corp. 2018. All rights reserved.
11
TeraTerm -
https://ttssh2.osdn.jp/index.html.en
For Unix-based systems (macOS, Linux), we recommend picocom or minicom.
Note: Additional setup may be necessary for macOS. Please consult Section 7.3 before
continuing.
2.3.2 Baudrate
The default baudrate of the NL-SW-LTE-SVZM20-ES is
921600
. Please make sure to
change the settings of your terminal program to reflect this.
3. Hardware Verification
3.1 Introduction
Now that the Skywire is installed in the NL-NB1DK-ES, it is time to verify that the
Skywire can connect to the network. This example uses TeraTerm on Windows 7,
however the process is similar for your platform. Generally,
- Setup your terminal program to use
baudrate 921600
and connect to your
Skywire port
- Issue the listed AT commands to verify communications and network connectivity
3.2 Insert USB Cable
Insert the USB cable to port J20 on the NL-M1DK-ES:
Insert the other end of the USB cable to your workstation.
