NimbeLink NL-AB-BBCL, User Manual

Page: 13 / 13

3.12. Grove Connections
The cape has two user populatable Grove connectors that allow users to attach
grove sensors. The J15 connector is wired into UART5 and the J16 connector
connects to I2C1. Both of connectors can also be configured as GPIO's by the
user if needed. It should be noted that the device tree overlay for the cape does
not configure any of the pins attached to the connectors.
The footprint on the PCB is designed to fit ​ JST S4B-PH-K-S(LF)(SN) ​ connectors.
4. Additional Resources
● Skywire Cellular Modems Product Page
● Sending and Receiving files with FTP
● Sending and Receiving data with Socket Dials
● Sending and Receiving SMS messages
● Sending GPS data using Python
● Defining PDP Contexts MSCs
● Streaming Video over LTE on BBC
● Starting PPP at Boot
● Starting PPP with SSH over Ethernet
PN 1001407 rev 1 ​ © NimbeLink Corp. 2017. All rights reserved. 13