NimbeLink NL-AB-BBCL, User Manual

Page: 12 / 13

3.11. USB Configuration
Connector J5 on the cape allows users to connect their BeagleBone directly to the
Skywire's USB interface using a mini-B USB Cable. Each skywire has a unique USB
interface and users should consult data sheet for the specific Skywiremodem they're
using for more details on interfacing to the modem over USB. In general users can
interface with the Skywire's USB interface in the same manner as the UART when using
the cape.
Users can set up the modems to provide a seamless network interface to their
BeagleBone. Depending on the modem a different protocol, such as PPP, CDC-ETH,
CDC-NCM, or QMI, will be required. To set up the network connection for your modem
please refer to the guide listed below for your modem. Please note that this list is not
exhaustive of the reference materials for the Skywire modems and additional
application notes may be available under your modem's product page in the Application
Notes section.
●
NL-SW-LTE-GELS3-C:
​
Sending and Receiving Data with CDC-ECM
●
NL-SW-LTE-GELS3-C:
​
Sending and Receiving data with PPPd
●
NL-SW-LTE-WM14:
​
Sending and Receiving data with CDC-ETHER
●
NL-SW-LTE-TSVG:
​
Sending and Receiving data with PPPd
●
NL-SW-LTE-TSVG:
​
Sending and Receiving data with QMI
●
NL-SW-LTE-TNAG:
​
Sending and Receiving data with PPPd
●
NL-SW-LTE-TNAG:
​
Sending and Receiving data with QMI
●
NL-SW-LTE-S7588-T:
​
Sending and Receiving Data with CDC-NCM
●
NL-SW-LTE-S7588-T:
​
Sending and Receiving data with PPPd
●
NL-SW-LTE-S7588-V:
​
Sending and Receiving Data with CDC-NCM
●
NL-SW-LTE-S7588-V:
​
Sending and Receiving data with PPPd
PN 1001407 rev 1 ​ © NimbeLink Corp. 2017. All rights reserved. 12