Nilo ALL-IN-ONE EASY, Operating Manual

Page: 35 / 120

33
Edition
001
/
12
EN
ALL-IN-ONE EASY
Pict.2 Hydraulic connection
STANDARD HYDRAULIC CONNECTION FOR WALL OUTLET
WARNINGS
INSTALLATION WARNINGS
The site floor must be smooth, flat and able to bear the weight of ALL-IN-ONE EASY.
Environmental conditions for use : Temperature from -5°C to +40°C.
HYDRAULIC WARNINGS
Make sure that the hydrualic system is complying with existing specifications.
Get a certified hydrualic to carry out the connections:
two inbound (cold water and hot water) and one outbound (drain)
HYDRAULIC CONNECTIONS
The ALL-IN-ONE EASY bed must be connected to the water supply network through:
• Adaptor 3/8” male for cold water
• Adaptor 3/8” male for warm water
• Pipe D40 male for wastewater
ELECTRIC WARNINGS
Make sure the electricity set up of the destination site was carried out in compliance with the existing rules.
Make sure that the voltage(Volts) and the power (Watt = Volt x Ampere) are compatible with the electricity
available at the outlet in the wall.
Make sure the outlet is ground connected.