Scrub System, Cylindrical
64
Service Manual – SCRUBTEC R466 ... FOCUS II Micro Rider
Removal and Installation
Removing and Installing the Brush Deck
Disassembly
1
Drive the machine on a level floor or on a
hoisting system to facilitate the disassembly
procedures
2
Remove the side skirt assemblies, the cylindrical
brushes and debris container
3
Turn the ignition key to “I”, lower the cylindrical
brush deck by pressing the scrub On/Off push
button
and then turn the ignition key to
“0”
4 Disconnect the red connector (A)
5 Disconnect the solution hose union (B)
6 Remove the safety pins (C)
7 Unscrew the mounting nut (D) and recover the
washer
8
Turn the ignition key to “I”, lift the deck holder
(E) by pressing the scrub On/Off push button
and then turn the ignition key to “0”
9 Turn the steering wheel all the way to the left to
remove the cylindrical brush deck
10 With a second operator who helps to keep
the deck holder (E) further lifted, remove the
cylindrical brush deck (F)
Assembly
11 Assemble the components in the reverse order of
disassembly
F
C
D
A
E
B
P100720