background image

64 

Original Instructions

Poseidon 2

2 Description

This high-pressure washer has 
been developed for semiprofes-
sional routine cleaning: 

-  Professional craftsman jobs, 

cleaning of vehicles, boat, 
caravan and minor cleaning 
jobs  within building and con-
struction 

Section 5 describes the use of 

the high-pressure washer for 
various cleaning jobs.

Only use the high-pressure 
washer for purposes described 
in this manual. 

The safety precautions must be 
observed to prevent damage 
to the machine, the surface to 
be cleaned or severe personal 
injuries.

2.1 Application

2.2 Operation elements
 

and model survey

See illustration at the end of 
this manual.

 1 Start/stop switch
  2  Water inlet (with fi lter)
  3  High pressure connection  

(only machines without 
hose reel)

  4  High pressure hose
 5 Electric cable
  6  Button for regulation of 

pressure and water volume

  7  Ergo 2000 spray handle 

with lock (7a)

  8  Flexopower Plus spray 

lance

  9  Turbohammer Plus spray 

lance

 10  Detachable detergent con-

tainer

 11  Nozzle cleaning tool
 12  Dosing of detergents
 13 Hose reel
 14  Hose hook (only machines 

without hose reel)

 15 Model tag 
 16  Button for telescopic handle
17  Telescopic handle
 18  Turnable cable hook

Specifi cations:

 See model tag  

(15) of machine.

We reserve the right to alter the 
specifi cations.

Summary of Contents for POSEIDON 2



















Reviews: