4
english
1)
Accessories / model variants
NEPTUNE E
1 Important safety instructions
For your own safety
The high-pressure cleaner
should only be used by author-
ized persons who have been
instructed in its use.
Although extremely easy to
operate, children should not be
allowed to use the cleaner.
General
Use of the high-pressure cleaner
is subject to the applicable local
regulations.
Besides the operating instruc-
tions and the binding accident
prevention regulations valid in
the country of use, observe rec-
ognized regulations for safety
and proper use.
Do not use any unsafe work
techniques.
Use only detergents approved
by Nilfisk-Alto.
Transport
Transport of the high-pressure
cleaner is easy on its large
wheels.
For safe transport in and on ve-
hicles we recommend preventing
the equipment from sliding and
tilting. Secure it with tie-downs
and apply the parking brake on
the castor wheel.
For transport at temperatures
around or below freezing 0°C
(32°F), anti-freeze should be
drawn into the pump beforehand
(see chapter 6).
Before starting the cleaner
Before use, check that the high-
pressure cleaner is safe and in
proper condition.
Regularly check whether the
power cord is damaged or shows
signs of ageing.
Use the high-pressure cleaner
only when the power cord is in
a safe condition. (risk of electric
shock using damaged cord!).
Check the rated voltage of the
high-pressure cleaner before
connecting it to the mains power
supply. Ensure that the voltage
shown on the rating plate cor-
responds to the voltage of the
power supply.
We strongly recommend that the
power supply to the high pres-
sure cleaner be connected via a
residual current circuit breaker.
This device stops the supply of
electricity if the leakage current
to the ground exceeds 30 mA for
30 ms or it has an ground tester
circuit.
Please observe the regulations
and provisions applicable in your
area. Before putting the high-
pressure cleaner into service,
carry out a visual check of all
the major components.
CAUTION!
High-pressure water jets can
be dangerous if misused. The
Symbols used to mark
instructions
Before using the
h i g h - p r e s s u r e
cleaner, be sure
to also read the
enclosed operat-
i n g i n s t r u c t i o n s
and keep them within reach at
all times.
Safety instructions
in these operating
instructions which
must be observed
to prevent risks
to persons are marked with this
danger symbol.
This symbol is used to
mark safety instruc-
tions that must be
observed to prevent
damage to the machine
and its performance.
T h i s i n d i -
c a t e s t i p s
and instructions
to simplify work
a n d
to ensure safe opera-
tion.
O p e r a t i o n s
marked with this
symbol should
only be carried
o u t by N i l f i s k -
A l t o S e r v i c e
Technicians.