Nilfisk-ALTO NEPTUNE E Operating Instructions Manual Download Page 11

11

english

1)

Accessories / model variants

NEPTUNE E

5.2  Some typical cleaning tasks
5.2.1 Agriculture

Task

Accessories

Method

Stables
Pig Pens, Sties

Cleaning of 
walls, floors and 
equipment

Disinfectant

Chemical Foam 
Injectors
Foam lance
Powerspeed lance
Floor Cleaner

Detergents
Universal
Alkafoam

Disinfectant
DES 3000

1. Soaking – apply foam to all surfaces (bottom to top) 

and wait for approx. 30 minutes.

2. Remove the dirt from surfaces with the high pressure 

lance or chosen accessory. Again, clean from bottom 
to top on vertical surfaces.

3. To flush away large quantities of dirt, change to low 

pressure mode and use the higher flow to push away 
the dirt.

4. Use recommended disinfectant products and methods 

to ensure hygiene. Apply DES 3000 disinfectant once 
the surfaces are perfectly clean.

Machinery
Tractors
ploughs etc.

Detergent injection
Powerspeed lances
Curved lances and 
underchassis washers
Brushes

1. Apply detergent to vehicle or equipment surfaces in 

order to soften up dirt and grime. Apply from bottom 
to top.

2. Proceed with cleaning using the high pressure lance.  

Clean again from bottom to top.  Use accessories to 
clean in difficult to reach places. 

3. Clean fragile areas such as motors, rubber at lower 

pressure levels to avoid damage.

5.2.2 Vehicle

Task

Accessories

Method

Vehicle bodywork

Standard lance
Detergent injection
Curved lances and 
underchassis washers
brushes

Detergents
Aktive Shampoo
Aktive Foam
Sapphire
Super Plus
Aktive Wax
Allosil
RimTop

1. Apply detergent to vehicle or equipment surfaces in 

order to soften up dirt and grime. Apply from bottom 
to top. In cases of particularly dirty vehicles, pre-spray 
with a product such as Allosil in order to remove traces 
of insects etc, then rinse at low pressure and apply 
normal car cleaning detergent. Let detergents settle 
for 5 minutes before cleaning off. Metallic surfaces can 
be cleaned using RimTop.

2. Proceed with cleaning using the high pressure lance.  

Clean again from bottom to top.  Use accessories to 
clean in difficult to reach places.  Use brushes in order 
to add a mechanical cleaning effect. Short lances can 
help for cleaning of motors and wheel arches. Curved 
lances or undercarriage washers  can be valuable for 
the cleaning of car underchassis and wheel arches.

3. Clean fragile areas such as motors, rubber at lower 

pressure levels to avoid damage.

4. Apply a liquid wax using the pressure washer in order 

to protect the bodywork from pollution.

Summary of Contents for NEPTUNE E


















Reviews: