7
EN
4.4 Start and stop of the ma-
chine
The spray lance is affected
by a thrust during operation
- therefore always hold it firmly
with both hands.
IMPORTA
N
T
:
Point the nozzle at the
ground.
1. Check that the machine is in
horizontal position.
N
OT
E
:
Do not place the
machine in high grass!
2. Release the trigger lock.
3. Activate the trigger of the
spray gun and let the water
run until all air has escaped
from the water hose.
4. Press the Start/stop switch
"
I
" (1).
5. Activate the trigger of the
spray gun.
Always adjust the distance and
thus the pressure of the nozzle
to the surface, which is to be
cleaned.
Do not cover the machine
during operation.
N
ote:
If the ma-
chine is left or not
used for 5 min-
utes, it must be switched off on
the start/stop switch "
O
" (1):
1. Press the start/stop switch
"
O
".
2. Disconnect the electrical plug
from the socket.
3. Shut off the water supply and
activate the trigger to relieve
the machine of pressure.
4. Lock the spray gun.
When releasing the trigger of
the spray gun, the machine
automatically stops. The ma-
chine will start again when you
re-activate the spray gun.
4.5 Regulation of spray
picture of Multispeed
®
nozzle
The spray picture can be re-
gulated on the Multispeed
®
nozzle.
Summary of Contents for C 100.1
Page 12: ...A...
