Nilfisk-ALTO C 100.1, Instruction Manual

Page: 3 / 13

4
EN
tioned requirements for length
and cable dimensions.
1.0 mm² max. 12.5 m
1.5 mm² max. 20 m
2.5 mm² max. 30 m
Cable connections should be
kept dry and off the ground.
Mains power connection
The following should be ob-
served when connecting the
high pressure washer to the
electric installation:
Only connect the machine to
an installation with earth con-
nection.
The electric installation shall
be made by a certifi ed elec-
trician.
It is strongly recommended
that the electric supply to this
machine should include a re-
sidual current device (GFCI).
Water connection
Connection to the public mains
according to regulations.
IMPORTA N T! Only use wa-
ter without any impurities. If
there is a risk of running sands
in the inlet water (i.e. from your
own well), an additional fi lter
should be mounted.
Repair and maintenance
WAR
N I N G! Always remove
the electric plug from the
socket before carrying out
maintenance work on the
machine.
Safety devices
Locking device on spray gun
(7a)
(see foldout at the end of
this manual) :
The spray gun features a lock-
ing device. When the pawl is
activated, the spray gun cannot
be ope rated.
Thermal sensor:
A thermal sensor protects the
motor against overloading. The
machine will restart after a few
minutes when the thermal sen-
sor has cooled.
2 Description
This high-pressure washer has
been developed for domestic
use within:
- Car, Motorbike, boat, cara-
van, trailer, patio/drive/fl ags-
tones, woodwork, brickwork,
barbecue, garden furniture,
lawn mower
Only use the high-pressure
washer for purposes described
in this manual.
The safety precautions must be
observed to prevent damage
to the machine, the surface to
be cleaned or severe personal
injuries.
2.2 Operation elements
and
model survey
See foldout at the end of this
manual.
1 Start/stop switch
2 Water inlet (with fi lter)
3 High pressure connection
4 High pressure hose
5 Electric cable
6 Spray lance
7 Spray gun with lock
8 Multispeed
®
nozzle
9 Powerspeed
®
nozzle
10 Foam sprayer
11 Nozzle cleaning tool
12 Gun and nozzle holder
13 Model tag
Specifi cations: See model tag
(13) of machine.
Sound pressure level L
pA
measured in accordance with
ISO 3744, EEC Directive
2000/14/EEC: xx dB(A).
Hand/arm vibrations measured
according to ISO 5349 is x m/s
2
.
We reserve the right to alter the
specifi cations.
2.1 Application