ENGLISH
INSTRUCTIONS FOR USE
18
146 2810 000(2)2008-07
Terra™ 4300B
MAIN BROOM REPLACEMENT
NOTE
Brooms with harder or softer bristles are available.
This procedure is applicable to all types of brooms.
CAUTION!
It is advisable to wear protective gloves when
replacing the main broom because there can be
sharp debris between the bristles.
Drive the machine on a level
fl
oor and engage the parking
1.
brake with the pedal (3) and the lever (4).
Turn the ignition key (72) to “0”.
2.
Unscrew the knobs (23) and remove the right door (22).
3.
Loosen the knob (A, Fig. 4).
4.
Unscrew the knobs (B, Fig. 4) and remove the broom
5.
compartment cover (C).
Remove the broom (A, Fig. 5).
6.
Check that the drive hub (A, Fig. 6) is free from dirt or
7.
foreign materials (ropes, rags, etc.) accidentally rolled up.
The new main broom must be installed with the bristles
8.
rows (B, Fig. 6) bent as shown in the
fi
gure.
Install the new main broom (C, Fig. 6) and ensure that the
9.
mesh (D) correctly
fi
ts into the relevant drive hub (A).
Install the broom compartment cover (C, Fig. 4) and
10.
tighten the knobs (B) and (A).
Install the right door (22), then tighten the knobs (23).
11.
Check and adjust the main broom height as shown in the
12.
previous paragraph.
A
B
C
B
S311391
Figure 4
S311392
Figure 5
S311393
Figure 6
Summary of Contents for Terra 4300B 908 4309 010
Page 2: ......
Page 37: ...MODE D EMPLOI FRAN AIS Terra 4300B 146 2810 000 2 2008 07 11 SCHEMA ELECTRIQUE suite S311411...
Page 99: ......
