ENGLISH
QUICK START GUIDE
36
SW4000 - 1464807000
MAINTENANCE
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions,
ZKLFKDUHWREHGH¿QHGE\WKHSHUVRQLQFKDUJHRIWKHPDLQWHQDQFH
$OOVFKHGXOHGRUH[WUDRUGLQDU\PDLQWHQDQFHSURFHGXUHVPXVWEHSHUIRUPHGE\TXDOL¿HGSHUVRQQHORUE\DQDXWKRULVHG6HUYLFH
Center.
This Manual describes only the easiest and most common maintenance procedures.
For other maintenance procedures shown in the Scheduled Maintenance Table, refer to the Service Manual that can be consulted
at any Service Center.
WARNING!
To perform maintenance procedures, the machine must be off, the ignition key removed, and, if necessary, the
batteries must be disconnected.
Read carefully the instructions in the Safety chapter before performing any maintenance procedure.
SCHEDULED MAINTENANCE TABLE
Procedure
Upon delivery
Every
10
hours
Every
50
hours
Every
100
hours
Every
200
hours
Every
year
Battery charging
(1)
%DWWHU\:(7ÀXLGOHYHOFKHFN
(2)
Side and main broom height check
Brake cable check and adjustment
(3)
+RSSHUGXVW¿OWHUFKHFNDQGFOHDQLQJ³$´PHWKRG
(4)
Hopper hydraulic lifting system oil level check
(2)
Skirt height and operation check
'XVWJXDUGV\VWHPZDWHU¿OWHUFKHFNDQGFOHDQLQJRSWLRQDO
+RSSHUGXVW¿OWHUFKHFNDQGFOHDQLQJ³%´PHWKRG
(4)
Filter shaker operation check
(*)
Main broom driving belt check
(*)
Steering chain cleaning
(*)
Safety system operation check
(2)
Brake pad check/adjustment/replacement
(*)(3)
+RSSHUGXVW¿OWHUFKHFNDQGFOHDQLQJ³&´PHWKRG
(4)
Main broom driving belt check and/or replacement
(*)
Hopper gasket integrity check
(*)
Lifted hopper sensor operation check/adjustment
(*)
Motor carbon brush check and/or replacement
(*)
Hydraulic system oil change
(*)(5)
(*) For the relevant procedure, refer to the Service Manual.
(1) Daily or after using the machine.
(2) Or before start-up.
(3) Or more frequently if the machine is used on slopes.
(4) Or more often in dusty areas.
(5) Change the hydraulic system oil after 500 hours or every year.
