manualshive.com logo in svg

Nilfisk-Advance SR 9772 56109414, Instructions For Use Manual, Page: 5 / 40

Share
Download
Nilfisk-Advance SR 9772 56109414 Instructions For Use Manual Download Page 5

SR9772 

FORM NO. 56041803 - 5

MACHINE SPECIFICATIONS

ELECTRICAL SYSTEM
Voltage 12V
Alternator 45Amp
Battery 

12V capacity 88 Ah, sealed, maintenance-free.

LIGHTS 

Two asymmetrical front headlamps using 40/45 W bulbs.

 

Two asymmetrical front headlamps using low halogen bulbs.

 

Two front light clusters including: side lights, directional indicator. 

 

Two rear light clusters including: side lights, directional indicator, brake light, number plate light. Red 

rear re

fl

 ectors.

INSTRUMENTS & ACCESSORIES
Multiple-function instrument panel, 7-pin 8 A DIN power socket, 25 A power socket, Thermo-start, and 

fl

 ashing hazard warning light.

CLEANING PATH 

72 inches 

TRANSPORT SPEED 

2-8 mph

SCRUB SPEED 

2-4 mph (refer to New Holland manual for proper gear selection)

TURNING RADIUS 

127.6 inches

AISLE WIDTH FOR U-TURNS  

11.5 feet

SOLUTION TANKS 

Two (2) 100 gallon capacity each, stainless steel 

 

construction, crossover lines (hoses) allows 

fi

 lling from either side, clean-out doors and oversize 

fi

 ll 

openings are standard.

RECOVERY TANK 

One (1) 210 gallon capacity, stainless steel construction, equipped with automatic vacuum shut-off 

fl

 oat.

 
VACUUM SYSTEM  

Power provided by a regenerative air turbine, V-belt driven.

SCRUB BRUSHES 

Four (4) 18-inch diameter, disc type.

 

Brushes are mounted to a 3/8” steel frame and are readily accessible. Hydraulic cylinder raises and 

lowers
 

brush assembly off ground level for travel and storage. Scrub brush discs are gimbal-mounted to follow

 irregular 

fl

 oor contours. 

 

One-piece or sectional brushes are available.

TIRES 

Front: Implement Tread (2) 6.50 - 16

 

Rear: Tutf Tires (2) 13.6 - 28 

SQUEEGEE ASSEMBLY 

Rear: Para-Bolic 80-inch (203.2 cm) break-away with no-tool squeegee replacement.

 

Side: 26 in (66 cm) Easy Change

OPTIONAL BRUSHES 

Bassine   

Amergrit

 Supergrit 

 

Soft 

Nylon

 Straight 

wire 

Amer

fi

 l (.025)

 Nylon 

 

Amer

fi

 l (.040)

 Amer

fi

 l & wire (one-piece only)

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for SR 9772 56109414









































Reviews:

No comments