32
-
FORM
NO.
56041803
SR9772
SERVICE INSTRUCTIONS
RECOVERY TANK
SCREEN
SOLUTION TANK
SOLUTION TANK COVER
SERVICING THE RECOVERY TANK
When the tank is full (9” from top), the red indicator light is activated on the console. At a height of 8” from the top of the tank, the
vacuum air
fl
ow to the squeegees will automatically shut off. On the camel system inspect, remove and clean inlet screens on the
bottom of the recovery tank.
To drain:
Position the machine at desired disposal location, position hose and open drain plug.
To clean:
To remove sludge after draining, open all the drain doors, hose out tank interior to
fl
ush sludge. The
fl
oat and
fl
oat cage should
be
fl
ushed clean. Remove clean-out cap and
fl
ush pick-up tube and squeegee hoses.
NOTE
Sludge accumulations greater than 2” will tend to clog the drain plug and drain hose.
SERVICING THE SOLUTION TANK
Standard Machine:
Periodically remove and clean out the solution inlet
fi
lter from the left- and right-hand side tanks.
Camel Machine:
Sediment on the
fl
oor of each tank should be
fl
ushed periodically. Crossover hoses should be disconnected and
fl
ushed
periodically.
https://harrissupplyind.com - To Order Parts Call 608-268-8080