Nilfisk-Advance SH AUTO Series, Instructions For Use Manual, Page: 23 / 33

23
SH AUTO
Original Instructions
A
B
C
A: Adjustment of temperature in
the cabinet.
B: Adjustment of temperature
for start of circulation of wa-
ter in hose, lance and handle
(only E).
C: Adjustment of temperature
for start of circulation of wa-
ter in hose, lance and handle
(only D).
Adjust the temperature by pressing the Boost button for 4 sec. Now
the value can be set on the potentiometer. Value can be read on
the display. After adjustment, the water temperature (temperature
for the user) must be adjusted too.
5 Maintenance
To ensure the most optimal maintenance of your SH AUTO, you should consider making a “Service
Contract” with Nilfi sk. In this way your SH AUTO will always be ahead of potential problems.
Though paying attention to a few things will ensure a prolonged and reliable operation of your SH
AUTO.
Therefore it will be a good idea to follow the schedule of maintenance below. All times are intended as
a guide and the maintenance should be made at more frequent intervals if required.
Day Week Month Year Winter
Fuel Check fuel level. Start machine and check
that the boiler is working. If not, see sec-
tion 3.7.
x
Detergent Check level in all detergent containers. x
Oil, high pres-
sure pump Check oil level. Refi ll if necessary. Send
for a Nilfi sk service technician as soon as
possible to have the cause of the oil con-
sumption established.
x
Coin collector Empty coin collector. x
Washing
brush Check the washing brush for wear and
impurities. Replace if necessary.
x
Hose/lance Check hose/lance for wear and leaks.
Replace if necessary.
x
Nozzle Check spray picture. Clean the nozzle if
necessary (see section 5.5).
x
Water break
tank Empty the water break tank and clean it of
impurities.
x
Detergent /
fuel contain-
ers Empty the containers and clean them
of impurities. Also clean the fi lters in the
detergent containers.
x