Squeegee System
92
Service Manual – SC450
Maintenance and Adjustments
Squeegee Cleaning
Warning! It is advisable to wear protective gloves when cleaning the squeegee because there
may be sharp debris.
1
Drive the machine on a level floor. Make sure that the machine cannot move independently.
2 Check that the control panel switches are turned to “0”
3 Lower the squeegee with the lever
4 Disconnect the vacuum hose (A) from the squeegee (B)
5 Loosen the handwheels (C) and remove the squeegee (B)
6
Wash and clean the squeegee (B). In particular, clean the compartments (D) and the vacuum hole (E)
from dirt and debris
7
Check the front blade (F) and the rear blade (G) for integrity, cuts and tears; if necessary replace them
(see the procedure in the following paragraph)
8
Assemble the components in the reverse order of disassembly, and note the following:
9
If necessary, use the handwheel (H) to adjust the squeegee balance.
E
D
B
D
G
F
E
G
F
C
H
B
C
A
P200037
