Scrub System, Disc - Battery Version
64
Service Manual – SC450
Maintenance and Adjustments
Brush Cleaning
Warning! It is advisable to wear protective gloves when cleaning the brush because there may
be sharp debris.
1
Drive the machine on a level floor and lift the brush/pad-holder deck. Make sure that the machine
cannot move independently
2 Check that the control panel switches are turned to “0”
3
Remove the brush/pad-holder (A) according to the following procedure:
• When the deck is lifted, grab the brush/pad-holder with the hands and turn it first in one direction
(B) and then in the other direction (C) to release it
4 Clean the brush with water and detergent
5
Check the brush bristles for integrity and wear; if necessary, replace the brush.
6 Install the brush
Front
A
B
C
P2000025
