Nilfisk-Advance ALPHA BOOSTER 3, User Manual

Page: 6 / 18

7
US 3 Before starting the washer
3.2 Mounting instructions 1. Hold the mounting bracket
against the wall and mark
the hole positions.
2. Drill four holes at the size
matching the fasteners to
be used. Pre-mount the
fasteners and the screws.
3. Mount the machine onto the
bracket's four rubber feet
and fasten with the enclosed
washers and nuts.
4. Hang the assembly of ma-
chine/bracket on the four
pre-mounted screws and
tighten.
3.1 Installation environment
3.1.1 Temperature conditions
The machine should be in-
stalled in a frost-free room.
This applies to pump as well as
pipelines incl. of outlet points.
Concerning outdoor outlet
points, it should be possible to
close and empty that part of the
line which is exposed to frost.
The maximum ambient tem-
perature for the machine is
40°C/104°F.
3.1.2 Conditions of distance Out of consideration for the
cooling system of the machine
and the accessibility of serv-
ice, there must be wall space
on both sides of the machine.
To the right 150 mm / 6 in. at
a minimum and to the left 400
mm / 16 in. at a minimum.
The recommended installation
height fot he machine is max.
1700 mm / 67 in. and min. 1550
mm / 61 in. to the upper edge of
the machine.
ATTENTION: Be-
ware that the
machine weighs
approx. 40-60 kg
/ 88-132 lb. Choose
fasteners and screws
suited for this weight.
!,0
(!
"//
34%
2
.ILFISK
!,
4/
-AXƒ#
-INƒ#
-INMM
-INMM
Max. 40°C/104°F
Min. 2°C/36°F
Min. 150 mm/6 in.
Min. 400 mm/16 in.
Max. 1700 mm/67 in.
Min. 1550 mm/61 in.