56041475
2
- If the batteries are installed but not filled
with acid solution they must be filled with
a solution of sulphuric acid (density not
lower than 1.270 Kg when at 25°C)
according to the instructions specified
below and in the Battery User Manual.
BATTERY FILLING UP WITH ACID SOLUTION
Warning: the battery acid is corrosive; if it
comes in contact with the skin or eyes rinse
thoroughly with water and consult a
physician.
The batteries must be filled in a well
ventilated area.
Fill every battery cell with acid; the right level
is specified in the Battery User Manual.
After one hour fill up with acid, if necessary.
Let batteries rest for a further hour; then
proceed with a recharge according to the
instructions specified in the Battery User
Manual and in the MAINTENANCE paragraph.
During the recharge the battery caps must be
open.
WARNING: before starting the recharge the
battery connector must be disconnected from
the machine.
After the recharge close all the cell caps and
clean the top of the battery from any acid
remains.
PRELIMINARY OPERATIONS
9
