56041475
Insert the ignition key into the panel and turn
it clockwise: the display will show all zeros and
after about three seconds the battery voltage
will appear.
Note
: the temporary lighting of the side brush
indicators and the short sound from the
reverse speed acoustic indicator
correspond to a normal behaviour.
Wait not less than three seconds before
restarting the machine after switch Off.
Check the charge status of the batteries on
the display.
Note
: the display has two functions: voltmeter
and hour meter. The voltmeter will
activate the block function during an
undervoltage; it will disable all the
machine activities - except for the drive
- when the battery voltage drops below
20 Volt (the display is flashing); when
this condition is achieved you have two
options: either recharge the battery
according the Maintenance paragraph,
or start the eco version.
To start the eco version press the red button
shown in the figure; to stop the engine press
the same button again.
To access the hour meter function press
the button shown in the figure: the
display will show the number of
machine service hours. Press the button
again to display the number of machine
service minutes. Pressing the button
again or waiting ten seconds the value
on the display will return to the battery
voltage level.
USE (ECO version)
17
