Nilfisk-Advance 56507000, Instructions For Use Manual

Page: 3 / 52

ENGLISH / A-3
FORM NO. 56041656 - Exterra™ / SR 1900 - A-3
INTRODUCTION
This manual will help you get the most from your Nil fi sk-Advance Sweeper . Read it thoroughly before operating the machine.
Note: Bold numbers in parentheses indicate an item illustrated on pages 8-11.
PARTS AND SERVICE
Repairs, when required, should be performed by Nil fi sk-Advance service personnel using Nil fi sk-Advance original replacement parts and
accessories.
Call Nil
fi sk-Advance for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
NAME PLATE
The Model and Serial Number of your machine are shown on the Nameplate on the right side of the machine. This information is needed when
ordering repair parts for the machine. Use the space below to note the Model and Serial Number of your machine for future reference.
MODEL ________________________________________________
SERIAL NUMBER _______________________________________
UNCRATING THE MACHINE
Upon delivery, carefully inspect the shipping crate and the machine for damage. If damage is evident, save all parts of the shipping crate so that
they can be inspected by the trucking company that delivered the machine. Contact the trucking company immediately to
fi le a freight damage
claim.
1 After removing the crate, remove the wooden blocks next to the wheels.
2 Check the engine oil and coolant levels.
3 Check the hydraulic oil level.
4 Read the instructions in the Preparing the Machine For Use section of this manual, then
fi ll the fuel tank.
6 Place a ramp next to the front end of the pallet.
7 Read the instructions in the Operating Controls and Operating the Machine sections of this manual and start the engine. Slowly drive the
machine forward down the ramp to the fl oor. Keep your foot lightly on the brake pedal until the machine is off the pallet.
CAUTION!
Use extreme CAUTION when operating this sweeper. Be certain that you are thoroughly familiar with all of the operating instructions
prior to using this sweeper. If you have any questions, contact your supervisor or your local Nil
fi sk-Advance Industrial Dealer.
Should your sweeper malfunction, do not attempt to correct the problem unless your supervisor directs you to do so. Have a
quali
fi ed company mechanic or an authorized Nil fi sk-Advance Dealer Service person make any necessary corrections to the
equipment.
Use extreme care when working on this machine. Neckties, loose clothing, long hair, rings and bracelets can get caught in moving
parts. Turn the Key Switch
(TT) OFF, remove the Key, set the Parking Brake (F) and disconnect the battery before working on the
machine. Use good common sense, practice good safety habits and pay attention to the yellow decals on this machine.
Drive the machine slowly on inclines. Use the Brake Pedal
(F) to control machine speed while descending inclines. DO NOT turn
the machine on an incline; drive straight up or down.
The maximum rated incline during transport with a 3 cylinder model is 15%.
The maximum rated incline during transport with a 4 cylinder model is 24%.
* Note: Reference the separately supplied engine manufacturer’s maintenance and operator manual for more detailed engine
speci
fi cation and service data.