Nilfisk-Advance 56413006, Service Manual

Page: 74 / 84

72 - FORM NO. 56043122 - BR 1100S, 1300S
8 - ELECTRICAL SYSTEM
MAIN CONTROL PROGRAMMING OPTIONS (CONTINUED)
Light Scrub Setting Adjustment:
FACTORY DEFAULT: SCRUB PRESSURE = ONE BAR, SOLUTION= ONE BAR, DETERGENT= 0 (IF AVAILABLE).
The light scrub pressure, solution rate and detergent rate can be programmed depending on its application where high solution rate is needed with light scrub
pressure or low solution rate with heavy scrub pressure. To change all or any one setting, scrub, solution and detergent, perform the following steps:
1 Turn the main power switch to the off position.
2 Press and hold the scrub on and wand switch.
3 While holding both switches, turn the main power key switch to the on position.
4 Continue to hold both switches until wand switch indicator turns on and the light scrub on switch indicator blinks.
5 Release both switches. The display will now show a scrub icon (either disc or cylindrical) with the current scrub pressure setting. Scrub off indictor will turn on
and light scrub indicator will blink.
6 Pressing the scrub on switch will now select the new scrub pressure. Pressing scrub off switch will save the new setting and move to the solution rate setting.
7 The display will now show solution icon with gauge. Light scrub indicator will stop blinking and solution indicator will blink. Pressing solution switch will now
select solution rate. Pressing scrub off switch will save the new setting and move to detergent setting (if available).
8 On machines equipped with the optional detergent system the display will now show detergent bottle with current setting. Detergent indicator will blink. Pressing
detergent switch will now select new detergent setting. Pressing scrub off switch will save the new setting and display the key switch icon.
9 Turn the key switch to the off position, the new settings will remain in effect until it is changed again.
SCRUB PRESSURE & CURRENT LOAD (AMPS) SPECIFICATIONS (TABLE 2)
Scrub Mode Scrub Pressure
Indicator
DECK TYPE
Disc BR 1100S Cyl. BR 1100S Disc BR 1300S Cyl. BR 1300S
Light Scrub 1 bar(#1) 40 AMPS 35 AMPS 50 AMPS 35 AMPS
Heavy Scrub 2 bars(#2) 50 AMPS 45 AMPS 60 AMPS 45 AMPS
Extreme Scrub 3 bars(#3) 65 AMPS 55 AMPS 80 AMPS 55 AMPS
SOLUTION FLOW RATE (TABLE 3)
Standard fl ow rates Over-ride fl ow rates
1 bar 2 bars 3 bars 4 bars 5 bars
BR 1100S Disk .84 GPM 1.00 GPM 1.50 GPM 2.00 GPM 2.50 GPM
BR 1100S Cylindrical .70 GPM .84 GPM 1.00 GPM 1.50 GPM 2.50 GPM
BR 1300S Disk 1.00 GPM 1.50 GPM 2.00 GPM 2.25 GPM 2.50 GPM
BR 1300S Cylindrical .84 GPM 1.00 GPM 1.50 GPM 2.00 GPM 2.50 GPM
DETERGENT SETTINGS (TABLE 4)
0 Normal detergent setting
- 10% less than normal detergent setting
+ 10% more than normal detergent setting