FORM NO. 56043122 - BR 1100S, 1300S -
41
WHEEL DRIVE SYSTEM - 6
STEERING CHAIN REMOVAL AND TENSIONING
1
Turn the master key switch off and separate the battery pack Emergency Disconnect
(11)
.
2
See Figure 6.2. From underneath the front of the machine loosen the (4)
(A)
Screws and push the lower steering column to the rear of the machine. This is
done to separate the Chain
(B)
from the Steer Sprocket
(C)
.
3
Remove both Master Links
(E)
that secure the chain to the Steer Plate
(D)
then remove the chain from the chassis.
4
Reassemble parts in reverse order and adjust chain tension so that there is about 3/16” – 1/4” (4.7 – 6.4mm) total de
fl
ection with moderate pressure applied
at the Mid-point
(F)
(as shown).
Service Tip Note:
Use a pry bar or shims between the chassis and steer column to help secure the tension adjustment when
tightening the (4) steering column mounting screws.
Maintenance
1
Inspect the chain for looseness and binding, re-tension the chain to 3/16”-1/4” (4.7 – 6.4mm) de
fl
ection by following the above adjustment instructions.
2
Keep all of the steer chain links oiled to prevent excessive wear and binding.
FIGURE 6.2
Summary of Contents for 56413006
