Service Manual-AS1050R
04 Control System 44
Parameter Setting Without Password
Some parameters in following table can be set without password. Please refer to following steps to set the parameters.
Power down
machine. Press “so” button and “solution -” button at the same time. Meanwhile power up machine. See
figure below. LCD will display the first parameter in 4 seconds, then release the two buttons. The parameters whose serial
numbers with “*” in the parameter setting tables can be modified. Do not change any of the other parameters unless
specifically directed by an authorized factory representative.
Parameter Setting Without Password
NO. Parameter Name
Value
Unit
Comment
1*
Battery Type
GEL
N/A
Battery type: WET, AGM, GEL, Discover-EV, ENE
2*
Load Unit Def
0
N/A
Restore factory settings
3*
LCD Contrast
15
N/A
Range: 0-40
4*
Vac OFF Delay
10
Seconds Vacuum motor off delay time
5
Working Max Spd
100
%
Work mode maximum speed (% of transport speed)
6
ECO Max Spd
75
%
ECO mode maximum speed (% of transport speed)
7
Tra Fwd H Spd
90
%
Traction motor maximum forward speed (% battery volt)
8
Tra Rvs H Spd
45
%
Traction motor maximum reverse speed (% battery volt)
9
Tra Acc Rate F
2
Seconds Traction motor forward acceleration rate
10
Tra Acc Rate R
3.5
Seconds Traction motor reverse acceleration rate
11
Tra Dec Rate F
1.5
Seconds Traction motor forward deceleration rate 2
12
Tra Dec Rate R
2
Seconds Traction motor reverse deceleration rate
13
Tra NoStSW DEC
2
Seconds Accelerator releasing deceleration rate 1
14
ACC-R Dec Rate
2
Seconds Accelerator releasing deceleration rate 2
Press buttons
Power up machine
Summary of Contents for 50000593
Page 11: ...Service Manual AS1050R 03 General Information 11 Machine Structure Figure 2 ...
Page 12: ...Service Manual AS1050R 03 General Information 12 Machine Structure continues Figure 3 ...
Page 13: ...Service Manual AS1050R 03 General Information 13 Control Panel Figure 4 ...
Page 15: ...Service Manual AS1050R 03 General Information 15 Dimensions continues ...
