Nilfisk-Advance 50000593, Service Manual

Page: 42 / 107

Service Manual-AS1050R
04 Control System 42
Main Controller (EB2) Parameter Setting
NO. Parameter Name Value Unit Comment
C2 Squ DwStop I 2 A
Squeegee down stop current
C3 Bru-d TopSpeed 40 V
Brush disc lifting motor maximum voltage
C4 Brd Max ADJSpd 30 V
Reserved
C5 Brd Min AdjSpd 15 V
Reserved
C6 BrD Up In RVS 0 N/A
Brush disc up in reverse. 0-Not up
C7 BrD Accel/Decl 0.6 Seconds
Brush disc lifting motor acceleration and deceleration rate
C8* Bru-D I Limit 4 A
Brush disc lifting motor current limiting value
C9* BrD Stall Time 3 Seconds
Brush disc lifting motor overcurrent protection time
D0 BrD Up Stop D-Tim 0 Seconds
Brush disc up delay time
D1 BrD DwStop D-Tim 0 Seconds
Brush disc down delay time
D2 BrD UpStop Mod 3 N/A
Brush disc up stop mode
D3 BrD DwStop Mod 1 N/A
Brush disc down stop mode
D4 BrD Up Stop Tim 8.4 Seconds
Brush disc up stop time
D5 BrD DwStop Tim 4.7 Seconds
Brush disc down stop time
D6 BrD Up Stop I 2 A
Brush disc up stop current
D7 BrD DW Stop I 2 A
Brush disc down stop current
D8 Aux1 Out Func 8 N/A
Auxiliary 1 output function
D9 Aux1 Off Dly T 0 Seconds
Auxiliary 1 output off delay time
E0 Aux1 Out Volt 31 V
Auxiliary 1 output voltage
E1 Aux2 Out Func 7 N/A
Auxiliary 2 output function
E2 Aux2 Off Dly T 0 Seconds
Auxiliary 2 output off delay time
E3 Aux2 Out Volt 5 V
Auxiliary 2 output voltage
E4 Brake Out Fun 1 N/A
Brake (P1) output function
E5 Brake Out Volt 7 N/A
Brake (P1) output voltage
E6 RVS Alarm Mode 0 N/A
Reverse alarm output mode
E7 Alarm Out Fun 9 N/A
Alarm output function
E8 Alarm OUT Volt 21 N/A
Alarm output voltage
E9 Acc Enab Alm 0 N/A
Accelerator enabling reverse alarm
F0 Valve Out Fun 3 N/A
Valve output function. 3-Panel control
F1 Valve Out Volt 32 N/A
Valve output voltage
F2 Vav Off In Rvs 0 N/A
Valve off in reverse
F3 Status Out Fun 0 N/A
Reserved
F4 Sat-Emp Time 5 Seconds
Solution tank empty diagnosis time
F5 Dir-Full Time 5 Seconds
Recovery tank full diagnosis time