I
N T E L L I
P
A D
®
C
I
K
E Y P A D
M
O D U L E S
14
Securing the Keypad Modules
1. Insert the included 1–1/4” long device screws into the oblong-shaped screw holes on
the top and bottom of the Keypad Module.
NOTE
: The oblong shape of the screw holes allows you to position the Keypad Module
so that it is vertical.
2. Position the Keypad Modules so that the screws are aligned with the threaded holes in
the J-box or P-ring.
3. Tighten the screws using a Phillips Screwdriver. DO NOT OVER-TIGHTEN. In some
instances, you may need to loosen these screws several turns to allow the Keypad
Module to fit flush with the Decora cover plate.
Installing the Decora Cover Plate
1. Use the shorter plate screws (included with the Decora style coverplates) to fasten the
Decora cover plate to the Keypad Module (you can choose from a single-gang up to a
four-gang plate). DO NOT OVERTIGHTEN THE PLATE SCREWS OR YOU MAY DAMAGE
THE COVER PLATE. Line up all the screws in the same direction for a finished look.
NOTE
: Certain ”old work” or “retro-fit” boxes, such as the Carlon B225R, have a plas-
tic “lip” which interferes with the Decora plate screws. This lip prevents you from being
able to tighten these screws completely. To make the clearance necessary for these
screws, you must remove the parts of the lip causing the interference. There are two
ways to accomplish this:
2. Drill through the lip of the box at the screw points.
3. Cut notches into the lip with a pair of diagonal cutters.
DS00266CCN-0 IntelliPad Ci.qxp 2/2/06 3:30 PM Page 16
